All about the ear phones

Home / Accessories / All about the ear phones

One of the first products that a DJ has to buy almost by obligation are good headphones. Some years ago it was relatively easy to choose quality helmets because there were very few professional brands that made decent headphones and the choice was between 4 and 8 different models. However, from the emergence of MP3 music players and especially smartphones, manufacturers have flooded the market with all kinds of headphones whose only link in common is that most are sold as DJ specials, when actually very few of these models are designed for intensive use by the DJ. Why don’t you see best earbuds under 50?

Today I want to really show you the features that good DJ headphones must meet, I will not focus on brands, models or anything that may distract you. Only what you must take into account so that you know if you are choosing good helmets or not.

  1. Frequency range: It is calculated in Hz (hertz) and basically deals with the audio spectrum perceived by the human ear. It is scientifically proven that the ear of a person perceives between 20 Hz and 20,000 Hz. Everything that is above or below those values ​​are sounds that are not perceived and if you do so we hardly learn. Good headphones should offer low frequencies very low and high very high, so you can listen to any sound detail. Gaze at earbuds under 50 reviews.
  2. Impedance: It is defined as the resistance that opposes the circuit to the flow of electricity. It is measured in Ohms (Ω) and you are interested to know that in the case of headphones the lower the better because it is understood that the audio passes as the player generates it.
  3. Sensitivity: It is measured in Decibels (dB) and it basically means how hard you can get to hear the headphones. Be careful because the human ear suffers irreversible damage when subjected to many decibels during a certain period of time. For more information I recommend you read the post How you can avoid hearing loss the DJ who explains this problem in detail.
  4. Ergonomics: The headphones should be comfortable, keep in mind that you will spend many hours with them so it is important that they have the padded headband as well as the headphones themselves. Some uncomfortable helmets will not focus on the session and you spend all night putting on and taking off your headphones. The majority of the headphones today are self-adjusting, this way you make sure that the headset is perfect for your head and especially for your ears. Look at earbuds under 50 reviews.
  5. Construction: Such is the use you will give your headphones that it is normal that in the case of poor quality products just last a few months and even a few weeks. The DJ by definition makes extreme use of everything that surrounds him; therefore it is logical to think that the headset has to be designed to withstand all kinds of situations. The elements that suffer most often are the pads that cover the headphones and the headband, no matter how good they are, it is normal that throughout the life of the product you have to take it at some point to the technical service to change those elements (some brands are incorporating sheep skin from Ethiopia to their headphones that is supposed to be more durable than other materials commonly used by the industry). If they are professional headphones do not have to worry because they are designed for a qualified technician to make the change without major problem. But if it is a cheap headphone I doubt very much that it even has that type of answers.
  6. Stereo: It seems silly, but there are many headphones on the market that work in mono, that is, they do not reproduce two audio signals at the same time but one. Some may ask you why you want two audio signals, when DJs generally use only one of the headphones and not both. The answer is very simple, there are many songs that if they are not heard in stereo can because you not know where the song starts and ends correctly and therefore cannot apply the CUE at the right time. Have a look at earbuds under 50 reviews.
  7. The cable: It is highly recommended that the cable is connected only on one side of the headphones, thus preventing it from coiling while you are playing and at the same time if it breaks, it is easier to change it with a new one. Most modern headphones already come with cable that can be connected and disconnected by the user. It is also advisable that the length of the cable is at least 1 meter, if it is less you will have many problems to move around the cabin and increase the chances that you pull the cable and that you can even reach it. There are models that come with the telephone type cable, which is nothing but the typical cable that can be stretched. While it is true that lately it is becoming very fashionable the normal cable that cannot be stretched. At this point it is a matter of taste and there is no technical reasoning that recommends you choose one type or another of cable.
  8. Type of connector: This section is very clear, ideally your future headphones come with minijack connector and jack adapter, this way you can be sure you can use it with a professional mixer or your laptop for example. It is also recommended that the connector be covered with gold, as it is the metal that best conducts the audio signal. Did you see earbuds under 50 reviews.

Conclusion:

Some excellent headphones would be one of the first investments that you should consider as a DJ. The differences between the good and the bad are abysmal, in addition to buying quality helmets guarantees a longer time of use as well as a very competent technical service that will make the useful life of the headphones lengthen more than expected.

At this point I would like to use the fabulous refrain and say that: Who buys cheap buys twice!